Skoč na obsah Skoč na menu

Marpex - senzorová, systémová a zbernicová technika

úvod / systémové riešenia / RFID - identifikačné systémy / interface / stupeň krytia IP67 / komunikácii pomocou 8 bytov I/O procesných dát

komunikácii pomocou 8 bytov I/O procesných dát

 
  communication via 8 byte I/O-process image
Depending on the applied BL ident module, our IP67 rated BLident interface modules are available with up to 16 channels for PROFIBUS-DP, PROFINET I/O, DeviceNet™, CANopen, Ethernet/IP and Modbus TCP communication.
The modular concept allows the user to plug input and output modules to the interface at a later stage.
All channels operate parallelly allowing simultaneous transmission of data.
Fieldbus diagnostics, supply voltage and the status of the individual channels are indicated via LEDs and complemented by fieldbus-specific diagnostic messages.
The communication is established on the basis of an 8-byte I/O module, reducing the programming effort significantly. Thus the user can link BL ident to all standard control systems without having to use function modules.

 Power search
 Info material
 BL67 - modular I/O system in IP67
 Show products (37)

Info material Description File size Download
Product catalogue BL67 - modular fieldbus I/O system in IP 67
5311 KB  
Product flyer fieldbus system BL67
2110 KB  
Product flyer BLident UHF
1581 KB  
Product flyer RFID system for the explosion hazardous area
718 KB  
Product flyer RFID solutions for chocolate production
651 KB  
BL20/BL67 supplementary manual for PROFIBUS-DPV1
869 KB  
User manual BL67 prog. EtherNet/IP Gateway - BL67-PG-EN-IP
3469 KB  
User manual 6 User manual for BL67-PG-EN
5624 KB  


Products:
Short description Dimension drawing Description
Extension module BL ident for I/O communication
Interface for connection of BL ident read/write heads (HF/UHF)
Type: BL67-2RFID-S
Ident-Nr.: 6827305
  • No special software (function module) is necessary for the integration in PLC systems.
  • 8 byte user data per read/write cycle
  • LEDs indicating status and diagnostics
  • Electronics galvanically isolated from the field level via opto couplers
  • connection of 2 BLident ® write-read heads
  • Mixed operation of HF and UHF read/write heads
  • Transmission rate: 115.2 kbps
  • Cable length: 50 m max.
Set for I/O communication via Profibus DPV1 in IP67
Type: TI-BL67-DPV1-S-2
Ident-Nr.: 1545106
  • No special software (function module) is necessary for the integration in PLC systems.
  • 8 byte user data per read-write cycle
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches for the adjustment of the Profibus address
  • Maximum transmission rate to the fieldbus 12 Mbps
  • Two 5-pole reverse-keyed M12 x 1 connectors for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 2 read/write heads (HF/UHF) via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for I/O communication via Profibus DPV1 in IP67
Type: TI-BL67-DPV1-S-4
Ident-Nr.: 1545107
  • No special software (function module) is necessary for the integration in PLC systems.
  • 8 byte user data per read-write cycle
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches for the adjustment of the Profibus address
  • Maximum transmission rate to the fieldbus 12 Mbps
  • Two 5-pole reverse-keyed M12 x 1 connectors for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 4 read/write heads (HF/UHF) via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for I/O communication via Profibus DPV1 in IP67
Type: TI-BL67-DPV1-S-6
Ident-Nr.: 1545108
  • No special software (function module) is necessary for the integration in PLC systems.
  • 8 byte user data per read-write cycle
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches for the adjustment of the Profibus address
  • Maximum transmission rate to the fieldbus 12 Mbps
  • Two 5-pole reverse-keyed M12 x 1 connectors for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 6 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for I/O communication via Profibus DPV1 in IP67
Type: TI-BL67-DPV1-S-8
Ident-Nr.: 1545109
  • No special software (function module) is necessary for the integration in PLC systems.
  • 8 byte user data per read-write cycle
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches for the adjustment of the Profibus address
  • Maximum transmission rate to the fieldbus 12 Mbps
  • Two 5-pole reverse-keyed M12 x 1 connectors for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 8 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via PROFINET IO in IP67
Type: TI-BL67-EN-PN-S-2
Ident-Nr.: 1545110
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • One 4-pole M12 connector, D-coded, for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 2 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via PROFINET IO in IP67
Type: TI-BL67-EN-PN-S-4
Ident-Nr.: 1545111
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • One 4-pole M12 connector, D-coded, for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 4 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via PROFINET IO in IP67
Type: TI-BL67-EN-PN-S-6
Ident-Nr.: 1545112
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • One 4-pole M12 connector, D-coded, for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 6 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via PROFINET IO in IP67
Type: TI-BL67-EN-PN-S-8
Ident-Nr.: 1545113
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • One 4-pole M12 connector, D-coded, for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 8 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via DeviceNet™ in IP67
Type: TI-BL67-DN-S-2
Ident-Nr.: 1545114
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 120/250/500 kbps
  • Two 5-pole 7/8" connectors for fieldbus connection
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 2 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via DeviceNet™ in IP67
Type: TI-BL67-DN-S-4
Ident-Nr.: 1545115
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 120/250/500 kbps
  • Two 5-pole 7/8" connectors for fieldbus connection
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 4 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via DeviceNet™ in IP67
Type: TI-BL67-DN-S-6
Ident-Nr.: 1545116
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 120/250/500 kbps
  • Two 5-pole 7/8" connectors for fieldbus connection
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 6 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via DeviceNet™ in IP67
Type: TI-BL67-DN-S-8
Ident-Nr.: 1545117
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 120/250/500 kbps
  • Two 5-pole 7/8" connectors for fieldbus connection
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 8 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet/IP in IP67
Type: TI-BL67-EIP-S-2
Ident-Nr.: 1545118
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches for the adjustment of the Profibus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • One 4-pole M12 connector, D-coded, for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 2 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet/IP in IP67
Type: TI-BL67-EIP-S-4
Ident-Nr.: 1545119
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches for the adjustment of the Profibus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • One 4-pole M12 connector, D-coded, for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 4 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet/IP in IP67
Type: TI-BL67-EIP-S-6
Ident-Nr.: 1545120
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches for the adjustment of the Profibus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • One 4-pole M12 connector, D-coded, for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 6 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet/IP in IP67
Type: TI-BL67-EIP-S-8
Ident-Nr.: 1545121
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches for the adjustment of the Profibus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • One 4-pole M12 connector, D-coded, for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 8 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet Modbus/TCP in IP67
Type: TI-BL67-EN-S-2
Ident-Nr.: 1545150
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 2 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet Modbus/TCP in IP67
Type: TI-BL67-EN-S-4
Ident-Nr.: 1545151
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 4 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet Modbus/TCP in IP67
Type: TI-BL67-EN-S-6
Ident-Nr.: 1545152
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 6 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet Modbus/TCP in IP67
Type: TI-BL67-EN-S-8
Ident-Nr.: 1545153
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 8 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet/IP with DeviceNet™ master in IP67
Type: TI-BL67-EN-IP-DN-S-2
Ident-Nr.: 1545158
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 2 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet/IP with DeviceNet™ master in IP67
Type: TI-BL67-EN-IP-DN-S-4
Ident-Nr.: 1545159
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 4 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet/IP with DeviceNet™ master in IP67
Type: TI-BL67-EN-IP-DN-S-6
Ident-Nr.: 1545160
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 6 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Set for simple I/O communication via Ethernet/IP with DeviceNet™ master in IP67
Type: TI-BL67-EN-IP-DN-S-8
Ident-Nr.: 1545161
  • No special software (function module) is necessary for the integration in PLC systems.
  • Up to 50m cable length between interface and read-write head
  • 3 decimal coded rotary switches to adjust the bus address
  • Maximum transmission rate to the fieldbus 10/100 Mbps
  • 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 8 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via PROFIBUS-DP in IP67
Type: TI-BL67-PG-DP-S-2
Ident-Nr.: 1545094
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 12 Mbps
  • 5-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 2 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via PROFIBUS-DP in IP67
Type: TI-BL67-PG-DP-S-4
Ident-Nr.: 1545095
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 12 Mbps
  • 5-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 4 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via PROFIBUS-DP in IP67
Type: TI-BL67-PG-DP-S-6
Ident-Nr.: 1545096
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 12 Mbps
  • 5-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 6 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via PROFIBUS-DP in IP67
Type: TI-BL67-PG-DP-S-8
Ident-Nr.: 1545097
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 12 Mbps
  • 5-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 8 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via Ethernet Modbus/TCP in IP67
Type: TI-BL67-PG-EN-S-2
Ident-Nr.: 1545098
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • 4-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 2 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via Ethernet Modbus/TCP in IP67
Type: TI-BL67-PG-EN-S-4
Ident-Nr.: 1545099
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • 4-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 4 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via Ethernet Modbus/TCP in IP67
Type: TI-BL67-PG-EN-S-6
Ident-Nr.: 1545100
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • 4-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 6 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via Ethernet Modbus/TCP in IP67
Type: TI-BL67-PG-EN-S-8
Ident-Nr.: 1545101
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • 4-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 8 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via Ethernet/IP in IP67
Type: TI-BL67-PG-EIP-S-2
Ident-Nr.: 1545102
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • 4-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 2 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via Ethernet/IP in IP67
Type: TI-BL67-PG-EIP-S-4
Ident-Nr.: 1545103
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • 4-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 4 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via Ethernet/IP in IP67
Type: TI-BL67-PG-EIP-S-6
Ident-Nr.: 1545104
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • 4-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 6 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
Programmable set for simple I/O communication via Ethernet/IP in IP67
Type: TI-BL67-PG-EIP-S-8
Ident-Nr.: 1545105
  • Programmable acc.to IEC 61131-3 with CoDeSys
  • Up to 50m cable length between interface and read-write head
  • 10/100 Mbps
  • 4-pole reverse-keyed M12 connector for fieldbus connection
  • One 5-pole 7/8" connector for power supply
  • LEDs for display of supply voltage, group and bus errors as well as status and diagnostics.
  • Connection of up to 8 read/write heads via BLident ® M12 connecting cables
  • Mixed operation of HF and UHF read/write heads
 
 
odkaz emailom odkaz emailom vytlačiť vytlačiť
 
 

úvod | kontaktný formulár | mapa stránok | textová verzia
© 2012 MARPEX, s.r.o. | tvorba web stránok

Tel./fax Tel./fax:

042 44269 86-87
042 44400 10-11

Adresa:

Marpex, s.r.o.
Športovcov 672, Dubnica nad Váhom